Radius

Solidtech

Radius corner-pillars are made from the finest Swedish Aluminum extrusion and beatifully anodized in either deep black or satin silver finish.
The choice of Aluminum and extensive internal bracing provides for a very favorable weight/stiffness ratio and a non ringing design.

Four well chosen pillar lengths constitute standard range, namely 65,5; 150; 234,5 and 319 mm. Radius can in this way be tailor made to your needs and wishes. If that was still not good enough, we are making custom pillar lengths between 30-650 mm.
Radius standard racks are available in ten different sizes from 680 mm to 2180 mm length, seven different shelf variants and two different pillar colors, the choise is entirely yours.

Radius Racks

DUO 2



Width: 1270mm
Depth: 500mm
Height:460mm
Maximum load/shelf: 2x60kg
Width between pillars: 520mm
Distance between shelves: 319mm

Cinema 5



Width: 1590mm
Depth: 500mm
Height – side: 545mm
Height – center: 630mm
Maximum load side shelves: 60kg Maximum load center shelves: 50kg
Width between side pillars: 510mm Width between center pillars: 830mm
Distance between center shelves: 319mm Distance between side shelves: 150 and 235mm

SOLO 6 HT



Width: 1860mm
Depth: 500mm
Height: 460 and 375mm
Maximum load/shelf: 60kg
Width between pillars: 500mm (center), 510mm left and right section
Distance between shelves: 150 and 235mm. Please notice that the lower shelf in the center section also can be mounted so that the distance to the upper shelf becomes 235mm.

DUO 3



Width: 1270mm
Depth: 500mm
Height: 545mm
Maximum load/shelf: 2x60kg
Width between pillars: 520mm
Distance between shelves: 150 and 235mm, can be assembled in any order.

SOLO 2



Width: 680mm
Depth: 500mm
Height: 460mm
Maximum load/shelf: 60kg
Width between pillars: 520mm
Distance between shelves: 319mm

SOLO 4



Width: 680mm
Depth: 500mm
Height: 880mm
Maximum load/shelf: 60kg
Width between pillars: 520mm
Distance between shelves: 150, 235 and 319mm, can be assembled in any order.

SOLO 1



Width: 680mm
Depth: 500mm
Height: 120mm
Maximum load/shelf: 60kg

SOLO 3



Width: 680m
Depth: 500mm
Height: 545mm
Maximum load/shelf: 60kg
Width between pillars: 520mm
Distance between shelves: 150 and 235mm,
can be assembled in any order.

SOLO 5



Width: 680mm
Depth: 500mm
Height: 1055mm
Maximum load/shelf: 60kg
Width between pillars: 520mm
Distance between shelves: 150,150, 235 and 319mm, can be assembled in any order.

Radius Options and Accessories

Radius isolaton system



Extremely efficient and adaptable isolation system  The equally safe as ingenious and highly effective Radius Solo isolation device for the shelves is easily integrated into the corner pillar. Assembly of the device is simple, fast and does not require any tools.   Adapting and level adjustment for various weights, as well as unevenly distributed weight, can be easily accomplished at the point of assembly, by increasing or decreasing the amount of springs. If later on, there is a change in equipment used, just add or subtract amount of springs – no tools required.   The suspension kit for top or extension shelves contain all required parts needed for the isolation of the shelf plane. By using appropriate number of the 12 included springs, one can accomplish extremely effective isolation characteristics in all planes for weights ranging 5-20 kg (11-44 lb). The springs are made of high-grade SS1774-04 steel, the highest industrial quality chosen for its superior reliability and non fatigue characteristics. Naturally, one can increase amount of springs to isolate weights up to 60 kg (132 lb), which is the maximum recommended shelf load.

Floor protectors Black



Floor protectors Black The aluminum floor protector is engineered and designed in order to protects your floor but also reduce the amount of vibrational energy going into the rack.

Floor protectors Silver



Floor protectors Silver

Corner Pillars



Radius corner-pillars are made from the finest Swedish Aluminum extrusion and beatifully anodized in either deep black or satin silver finish.
The choice of Aluminum and extensive internal bracing provides for a very favorable weight/stiffness ratio and a non ringing design.
Four well chosen lengths constitute standard range, namely 65,5, 150, 234,5 and 319mm.
Are you in the need for a different mix of corner-pillars in your Radius kit? No problems at all! If the actual design allows for an exchange we can tailor made to your needs and wishes. If that were still not good enough, we are making custom lengths between 30-650mm.

Solid mounting



All Radius models have nicely countersunk aluminum top washers that allows a solid mounting.

Radius Shelf - Birch Veneer



Birch Veneer

Radius Shelf - Cherry Veneer



Cherry Veneer

Radius Shelf - White texture



Radius Shelf – White texture

Radius Shelf - Oak Veneer



Radius Shelf – Oak Veneer

Radius Shelf - Black texture



Radius Shelf – Black texture

Radius Shelf - Mocca stained Oak Veneer



Radius Shelf – Mocca stained Oak Veneer

Radius Shelf - Walnut Veneer



Radius Shelf – Walnut Veneer

Awards

Audio Accessory Excellence Award 2014